Reducers
A unique selection of reducers
We stock concentric and eccentric reducers made of steel and stainless steel in accordance with EN10253-2/-4, DIN 2616 and ASME B16.9. Our stock range includes reducers in materials such as P235GH through 16Mo3 to P355N/NL/NH and 10CrMo9-10 or WPB through WP11, WP22 and WP5 to high yield grades such as WPHY52 as well as in materials such as 1.4301 through 1.4404 to 1.4462 or WP304 through WP316L and WP310S.
Steel reducers in accordance with EN and DIN are available from stock with a reduced rate of utilization (EN 10253-2 / EN 10253-4 type A or DIN 2616 part 1), as well as with a full rate of utilization (EN 10253-2 / EN 10253-4 type B or DIN 2616 part 2) and are immediately available from stock.
TÜV and PED approved
All manufacturers of our stock products are ISO 9001 certified and PED approved. We only supply elbows and fittings according to EN from TÜV- and PED-approved manufacturers with MTC EN 10204-3.1 or MTC 3.2 TÜV in accordance with the applicable AD data sheets.
Reducers made of carbon steel
We stock carbon steel reducers as follows:
EN
10253-2 Type A,
10253-2 Type B
Range of sizes
17.2 mm – 610.0 mm
Range of wall thicknesses
Range 1–8
(and stronger)
Design
concentric
eccentric
ASME
B16.9
Range of sizes
1/2’’ –24’’
Range of wall thicknesses
SCH20 – XXS
(and stronger)
Design
concentric
eccentric
DIN
2616 Part 1,
2616 Part 2
Range of sizes
17.2 mm – 610.0 mm
Range of wall thicknesses
Range 1–5
(and stronger)
Design
concentric
eccentric
Stainless steel reducers
We stock reducers in a wide range of stainless-steel materials and designs.
EN
10253-4 Type A,
10253-4 Type B
Range of sizes
17,2 mm – 323,9 mm
Range of wall thicknesses
Range 1-6
(and stronger)
Design
concentric
eccentric
ASME
B16.9
Range of sizes
1/2’’ – 12’’
Range of wall thicknesses
SCH10S – XXS
(and stronger)
Design
concentric
eccentric
DIN
2616 Part 1,
2616 Part 2
Range of sizes
17,2 mm – 323,9 mm
Range of wall thicknesses
Range 1–5
(and stronger)
Design
concentric
eccentric
Reducers according to customer requirements
Thanks to our in-house machining center, we are able to machine our stock material at short notice according to customer requirements or manufacture turned parts from solid material.